ARB分拣机

英特乐S7000包裹靠边机构

滚珠模组带靠边技术

包裹宽度635mm以内

适用电商包裹、箱子、异形软包靠边

处理能力3500件每小时

SEW电机

碳钢机架

英特乐S4500异常产品90度剔除机构

包裹宽度609mm以内

适合于电商包裹、箱子、软包（长宽100mm以上）

异常90度剔除可达每分钟55件

SEW电机

碳钢机架

Configuration: Single Exit - Rejecter

KEY BENEFITS

• Improves line efficiency by minimizing jams and related downtime • Eliminates product damage with its gentle, “touchless” product-handling system • Increases throughput as compared to pusher- and diverter-arm solutions • Enhances safety by eliminating the need for safety cages or other moving parts outside the conveyor • Small footprint saves floor space • Low cost of ownership

The DARB™ Sorter S4500 ensures high performance at low and high throughputs, ideal for manufacturers seeking a reliable, compact, and gentle reject sorter solution. This automated reject sorts at a 90-degree angle without using pushers or similar devices. Employing Intralox’s patented DualStacked Angled Roller Belt™ (DARB™) technology decreases maintenance time and cost compared to traditional technologies, and does not require a safety cage.

IDEAL SOLUTION FOR: •   Rejecting after scales, labelers, X-ray machines, and metal detectors •   Rejecting and diverting a wide range of products, such as ) Fragile and delicate packages  ) Light and heavy products  ) From boxes to bags

•   Narrow and short footprints (e.g. against walls) •  Handling high throughputs ) Up to 55 ppm for 16 in x 24 in  (400 mm x 600 mm) products ) Up to 95 ppm for 12 in x 16 in  (300 mm x 400 mm) products

Single Divert Multiple Divert SorterMultiple Diver t Sorter

DARB S4500 Belt

Belt Travel Direction

SYSTEM CAPABILITIES Divert Single sided divert, left or right Throughput (varies by package size) • 120 products per minute, based on a 10 in x 10 in (250 x 250 mm) package • 95 products per minute, based on a 12 in x 16 in (300 x 400 mm) package • 55 products per minute, based on a 16 in x 24 in (400 x 600 mm) package Product Bottom Surface Flat, smooth bottom surfaces are best; some plastic crates and polybags might be  possible, but subject to testing Product Dimensions Minimum:

Maximum: Weight:

4 in x 4 in (100 mm x 100 mm) (can be diverted by the DARB belt) 8 in x 4 in (200 mm x 100 mm) (for units with pop-out roller transfers) Model dependent - see table below Max. 40 lb/ft2 (195 kg/m2) Minimum Product Gapping Widest product width plus 4 in (100 mm)

When Intralox ARB™ equipment solutions are applied to a full line layout they can enable  radical improvements of layout concepts that are not possible with traditional technology. Consult Intralox at the start of your next project.

EQUIPMENT SPECIFICATIONS - 7 Stainless Steel Models, IP65 Class Protection

7 Models

Belt Width¹ 12 in (305 mm) 16 in (406 mm) 20  in (508 mm) 24 in (609 mm) 28 in (711 mm)

Conveyor Length¹

36.3 in (950 mm) - 12 in (305 mm)² - - 40.3 in (1050 mm) 16 in (406 mm) - 16 in (406 mm)² - 44.3 in (1150 mm) - 20 in (508 mm) - - 20 in (508 mm)² 48.3 in (1250 mm) - - 24 in (609 mm) - 52.3 in (1350 mm) - - - 28 in (711 mm)

¹ The dimensions listed in cells refer to the max package handling length at an average speed.  At higher rates the maximum package dimension will decrease. The max package handling width in travel direction equals the listed belt width ² Package travel orientation: Long side leading These sizes can be provided with a conveyor belt height from 26.1 in (661 mm) to 6 feet (1800 mm) with adjustment  +/- 2 in (50 mm). These models are equipped with an adjustable guide-rail, with double 1.25 in (32 mm) UHMW wearstrip opposite to the divert side. For other dimensions contact Intralox

Intralox ARB™ Switch S7000

Key Benefits

• Accommodates up to 500 packages per minute • Multiple infeeds can run simultaneously, saving floor space and enabling increased throughput • Handles nearly all package types • Easily adaptable to accommodate changes in packaging • Provides a lower cost of ownership with minimal downtime and maintenance costs

The Intralox ARB Switch S7000 effectively and efficiently switches and diverts virtually all package types at high throughput rates. It can accommodate multiple infeeds and discharges, enabling a nearly infinite number of product trajectories. All moving parts are contained within the machine, which eliminates the need for expensive safety guarding.

IDEAL SOLUTION FOR: • Throughputs exceeding 80 products per minute • Limited available footprint •  A continuous flow of products through multiple infeeds

• Handling a wide range of products • When discharge points must be very precise •  When multiple and variable discharge points are needed

Throughput* Up to 500 products per minute depending on product size and local conditions Product Bottom Surface Virtually no restrictions Product Dimensions Minimum: Maximum: Weight: 5 in. x 3 in. (127 mm x 76 mm) No restrictions No restrictions Minimum Product Gapping 4 in. (102 mm) Product Orientation Handles products with short side leading or long side leading Infeed Position Side and/or center infeed Number of Infeeds/Outfeeds Multiple (or 1) / Multiple *A continuous product flow is enabled by installing Intralox’s Registration conveyor as an infeed.

EQUIPMENT CAPABILITIES

ARB Switch S7000 equipment can change the trajectory of an item, moving it to the left, right, or center of the conveyor belt without the use of rails or other devices that touch the product. Products running on ARB technology rest on free-spinning rollers rather than on the belt surface. These rollers extend above and below the belt surface and can be positioned at an angle in relation to the direction of belt travel. Without using rails or complicated mechanical controls, selectively activated rollers move products across the belt in the direction of roller orientation rather than in the direction of belt travel.

WORKING PRINCIPLE

When Intralox ARB™ equipment solutions are applied to a full line layout they can enable  radical improvements of layout concepts